MP1 Test part 1: Exposure - Value of light
Do now: Take a picture on your SD card & origami crane with your name and class on the wing. send picture to mcsmphoto@gmail.com subject AJS11-0_ Your name Test part 1
Classwork: MP1 test part 1 Practice with try it on this virtual camera from CANON
2 uploaded and shared in MP1 album.
Each table will have up to 3 pairs ... Pair#1: Pair# 2 pair # 3
( one photographer & lighting assistant)
one of you will come up and pick up the camera with your ID.
you will be the one to return the camera at the end... so make sure you let the other classmate go first each student will have 5 to 10 minutes to complete taking the picture.
first thing first take out your SD card ... then check the lens to see if it's in MF mode not
For this TEST project, you have to shoot your " art piece" in Manual mode only.
In Quick Menu: set the image quality to RAW (CR2) + L and the ISO to 800 (light sensitivity) for odd computer #
ISO 1600 (light sensitivity) for even computer #.
ISO 1600 (light sensitivity) for even computer #.
In Shutter Speed Mode: Adjust the shutter speed or exposure to 1/60 sec(odd#) 1/100 sec for (even#)
Take one in this setting. if the picture comes out too bright or too dark. you may NEED to make some adjustments to obtain a properly exposed photo without flash.
Upload JPG to Google photo album as pic
T1: Test default (odd or even) , T2:Tested final
* Test default setting - what is wrong with it?
* corrected setting - what did you adjust?
* Test default setting - what is wrong with it?
* corrected setting - what did you adjust?
Upload JPG to Google photo album as pic #30a,30b
#T1 -Test default setting - answer
#T2 -corrected setting - answer
#T1 -Test default setting - answer
#T2 -corrected setting - answer
Origami crane with shadow....
No comments:
Post a Comment